LYDL bearing assortment with thin section, geared and flanged bearing designs

KB060CP0 Thin Section Bearing Reference – Open Type C

KB060CP0 thin section bearing reference: LYDL-B060 Type C, open radial-contact thin section bearing.
Nominal d × D × B: 6 × 6.625 × 0.3125 in (152.4 × 168.275 × 7.9375 mm).
KB family with 0.3125-inch radial section and axial width; housing and retainers require separate space.
Six-inch shaft interface with a 168.275 mm outer seat.
Kaydon reference dynamic and static radial loads are separately identified in the detail table; LYDL ratings require supply confirmation.
Request a quote with quantity, application and destination; provide mounting requirements for drawing review.

Six-inch shaft interface with a 168.275 mm outer seat

The KB060CP0 thin section bearing reference is an open radial-contact design measuring 152.4 × 168.275 × 7.9375 mm. It retains the six-inch bore while using the KB five-sixteenths-inch section. A quotation should identify LYDL-B060 Type C and KB060CP0 together, with operating requirements added as the selection develops.

Dimensions · Reference loads · Model comparison · FAQ

KB060CP0 thin section bearing dimensions

Parameter	Symbol	in	mm
Bore diameter	d	6	152.4
Outside diameter	D	6.625	168.275
Axial width	B	0.3125	7.9375
Radial section	(D − d) / 2	0.3125	7.9375

Checking radial space around a fixed six-inch shaft

For a fixed shaft diameter, the KB section adds 7.9375 mm between the bore surface and outer surface on each side. The surrounding housing wall lies beyond that allowance. A hollow housing with ports, tapped holes or pockets needs its remaining support geometry assessed after the seat diameter is chosen. The width is also 7.9375 mm, but an axial retention scheme can consume more space than the bearing itself. Account for the shoulder, cover and any external sealing arrangement. Neither the inch reference nor the metric conversion defines those machine-specific details.

Kaydon KB060CP0 reference load ratings

Reference rating	lbf	kN (converted)
Dynamic radial — Kaydon method	1,034	4.599
Dynamic radial — ISO comparison	2,108	9.377
Static radial	2,560	11.387

Source: Kaydon official model table, referenced below. These are Kaydon reference capacities, not verified LYDL supply ratings. Dynamic values use a one-million-revolution L10 basis; the ISO column is a comparison rating calculated per ISO 281:1990. Static values assume rigid shaft and housing support. Ratings are not additive or simultaneous permissible loads. Conversion: 1 lbf = 0.0044482216152605 kN; displayed kN values are rounded.

Brand designations for this nominal envelope

Brand	Designation	Scope
LYDL	LYDL-B060 Type C	Supply inquiry identity
Kaydon	KB060CP0	Open radial-contact reference
Silverthin	SB060CP0	Same nominal size and contact family
INA / Schaeffler	CSCB060	CSC catalog radial-contact reference

KB060CP0, SB060CP0 and CSCB060 identify brand-specific references for the 6 × 6.625 × 0.3125 in radial-contact envelope. INA / Schaeffler uses CSC for the Conrad radial family; its following letter identifies the section. Compare the complete specification before interchange. Brand names remain with their owners; this LYDL offer does not imply brand authorization. Catalog references do not guarantee current availability.

Discuss your size and configuration

Send KB060CP0, quantity and the application to begin a quotation. Where an existing assembly must be preserved, identify its fixed interfaces and include the available drawing. A complete analysis is not required to start the commercial inquiry.

Request a Quote Request a Drawing

Radial support near a process enclosure

A six-inch rotating shaft adjacent to an enclosure may expose the bearing to particles, cleaning operations or temperature changes. The open design allows access to the bearing interior and requires the machine designer to address protection and lubrication. Describe the real environment instead of assuming open means suitable for any enclosure. Where external seals are proposed, include their position and possible drag in the assembly review. Bearing friction, seal friction and drive losses are separate contributors. This example illustrates information needed for selection, not a documented sealing performance or process qualification.

Illustrations of thin-section-bearing application contexts — General application illustration; suitability of this model depends on the actual machine design.

Related sizes and installation envelopes

Reference	Bore d (in)	Outside D (in)	Width B (in)
KB060CP0	6	6.625	0.3125
KA060CP0	6	6.5	0.25
KC060CP0	6	6.75	0.375
KD060CP0	6	7	0.5

Each listed model has the same six-inch bore. KA reduces the section; KC and KD increase it. Their different outside diameters and widths are visible design constraints, while suitability for the process environment remains a separate specification question. Compare the installation dimensions of KA060CP0, KC060CP0, KD060CP0. Explore the open Type C size table and radial-contact bearing category. For another contact arrangement, see the KB060XP0 four-point contact reference.

Temperature information belongs with the fit request

Provide the expected temperatures of the shaft and housing, including warm-up behavior. Different temperatures or materials may alter fit and running clearance. The final assembly should be checked under conditions representative of the intended duty rather than only at an unspecified room temperature. Agree the lubricant and any cleaning compatibility before assembly. A protective shipping film should not be mistaken for a complete operating lubrication specification. Inspection documents should identify the agreed checks without implying an unverified test facility or performance certification.

Inspection, handling and packing

Use protective wrapping and restraint that keep the open bearing clean through transport and storage. If the installation area is exposed to process contamination, plan a clean unpacking stage and preserve the label until the bearing is matched to its drawing.

General bearing inspection and protective packaging illustration — Illustrative packing and inspection scenes; order-specific protection and records are agreed separately.

Questions about this model

Does open Type C include protection against washdown?

No integral seal is specified by this open reference. Washdown exposure requires an appropriate machine-level protection and lubrication plan; the bearing name alone is not a water-ingress rating.

Can seal drag be included in the published radial load?

Seal drag is a friction contribution, whereas the table gives radial capacity. Evaluate drag, heat generation and drive torque separately from the bearing’s radial loading.

What temperatures should be supplied for a fit review?

State the shaft and housing temperatures, expected gradients and warm-up cycle. Those conditions help assess dimensional changes and running clearance; a single ambient maximum may miss the critical operating difference.

Is the shipping coating the specified operating lubricant?

Not necessarily. Corrosion protection for storage and lubrication for service serve different purposes. Agree cleaning, lubricant type and initial filling requirements with the order before installation.

Which six-inch alternative needs the smallest outer seat?

Among the models compared here, KA060CP0 has the smallest nominal outside diameter at 165.1 mm. That geometric comparison does not by itself establish adequate capacity or the required service life.

Request a quote for KB060CP0

Include “LYDL-B060 Type C, KB060CP0 reference,” quantity and delivery destination. Add the required load case, speed and installation drawing when available. Ask for a drawing review if the shaft, housing or retention geometry must match an existing assembly.